# Nav2 Goal Rotation Issue

**URL:** <https://forum.hello-robot.com/t/nav2-goal-rotation-issue/1500>\
**Category:** Ask\
**Created:** [May 9, 2026, 12:40pm UTC](https://forum.hello-robot.com/t/nav2-goal-rotation-issue/1500 "2026-05-09T12:40:51Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jsh](https://avatars.discourse-cdn.com/v4/letter/j/e274bd/32.png) [@jsh](https://forum.hello-robot.com/u/jsh)\
**Post date:** [May 9, 2026, 12:40pm UTC](https://forum.hello-robot.com/t/nav2-goal-rotation-issue/1500/1 "2026-05-09T12:40:51Z")

</div>

I am facing a problem with my differential-drive robot navigation using ROS2 Humble Nav2.

One channel if my motor driver for backward motion is not working, so I disconnected the backward command. Because of this, the robot can only move forward and turn left/right. it cannot physically move backward.

The robot can navigate with Nav2 and it reaches close to the destination, but when it gets near the goal, it keeps rotating/turning many times before stopping. I think Nav2 might be trying to match the exact final pose/orientation, but for my application I do not need it to be exact.

What I want is for the robot to stop once it is close enough to the destination and roughly facing the correct direction. I want to avoid the repeated turning/spinning near the goal because it makes the movement unstable.

Could this be solved by tuning Nav2 parameters, or could the issue be caused by something else? If it is a tuning issue, which parameters or parts of Nav2 should I focus on ?

---

<div class="post-metadata">

**Author:** ![Jason\_Koubi](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.hello-robot.com/jason_koubi/32/1050_2.png) [@Jason\_Koubi](https://forum.hello-robot.com/u/Jason_Koubi)\
**Post date:** [May 11, 2026, 6:05pm UTC](https://forum.hello-robot.com/t/nav2-goal-rotation-issue/1500/2 "2026-05-11T18:05:51Z")

</div>

Hi @jsh,

Yes, this is likely a Nav2 tuning issue combined with the fact that the robot cannot move backward.

First, make sure your Nav2 controller/planner is not generating reverse motion. Depending on the controller, there are usually settings to disable backward motion or use forward-only behavior.

The spinning near the goal is also commonly caused by strict final orientation matching. I would try increasing `xy_goal_tolerance` and `yaw_goal_tolerance`.

Best,  
Jason
